How to fix black streaks on copies from Triumph Adler DC 2216 document processor?
If black streaks appear on copies when using the optional Document Processor with your Triumph Adler Copier, it's likely the slit glass is dirty. Clean the slit glass. Additionally, you can set the Processing to Reduce Black Streaks to make the streaking less noticeable.
How to add paper to MP tray on Triumph Adler DC 2216?
If your Triumph Adler Copier displays 'MP tray empty. Add paper.', set paper in the MP Tray.
How to improve copy clarity on Triumph Adler DC 2216?
If your Triumph Adler Copier produces a copy that is not clear, select the appropriate Image Quality Mode.
How to add toner to Triumph Adler Copier?
If your Triumph Adler Copier displays 'Add toner', it means copies cannot be produced because there is no toner. Replace the toner container with a new one.
Triumph Adler DC 2216 operation panel not displaying anything, how to fix?
If nothing appears on the Operation Panel of your Triumph Adler Copier even when the Power Switch is ON, plug the copier power cord into the outlet.
Why is my Triumph Adler DC 2216 copy skewed?
If the copy image from your Triumph Adler Copier is skewed, ensure the original is correctly set against the Original Size Indicator Plate when placing it on the platen. If using the optional Document Processor, make sure the original is correctly aligned with the original insertion guide. Also, check the position of the Width Guide in the cassette.
How to fix paper jam on Triumph Adler Copier?
If your Triumph Adler Copier displays 'Paper jam', it indicates that a paper misfeed has occurred. Remove the jammed paper to resolve the issue.
What to do if Triumph Adler DC 2216 Copier paper misfeeds frequently?
If your Triumph Adler Copier paper misfeeds occur frequently, ensure the paper is loaded correctly in the cassette. If the paper is curled, creased, or wrinkled, replace it with new paper. Remove any fragments of paper or jammed sheets. Also, ensure the paper size set in the MP Tray matches the MP Tray Size setting.
Why are my Triumph Adler DC 2216 Copier copies too dark?
If your Triumph Adler Copier is producing dark copies, it could be due to the exposure settings. If the copier is in Auto Exposure Mode, perform the “Auto Exposure Adjustment”. If it's in Manual Exposure Mode, use the Exposure Adjustment to set the proper exposure.
Why are my Triumph Adler DC 2216 copies too light?
If your Triumph Adler Copier produces light copies, several factors could be the cause: * If the copier is in Auto Exposure Mode, perform the “Auto Exposure Adjustment”. * If the copier is in Manual Exposure Mode, use Exposure Adjustment to set the proper exposure. * If the toner in the toner container is caked, shake the Toner Container left and right for approximately 10 times. * If the Add Toner Indicator is lit, replace the Toner Container. * If the paper is damp, replace it with new paper. * If the electrical charge section is dirty, open the front cover and use the Cleaning Rod to clean it.
General| Brand | Triumph Adler |
|---|---|
| Model | DC 2216 |
| Category | Copier |
| Language | English |
To Next Page
