Need help?Do you have a question about the Triumph Adler DC 2222 and is the answer not in the manual?
General| Type | Digital Copier |
|---|---|
| Print/Copy Speed | 22 ppm |
| Print/Copy Resolution | 600 x 600 dpi |
| Maximum Paper Size | A3 |
| Warm-up Time | 30 seconds |
| Zoom Range/Copy Magnification | 25% - 400% |
| Paper Weight | 60 - 163 g/m² |
| Original format | A3 |
| Memory | 256 MB |
Select paper source (cassette or multi purpose tray) for copying.
Select the size of the original for scanning and copying.
Choose mode (Text+Photo, Text, Photo) based on original content.
Adjust copy density using Auto or Manual modes for optimal results.
Set the desired quantity of copies, up to 999.
Specify original orientation (top edge, back edge) for specific copy functions.
Change copy orientation at set end for easy classification of multiple sets.
Staple copies at upper left or upper right corner if finisher is installed.
Create a blank margin space on the copy by shifting the image.
Erase shadows around edges of copies from sheet or book originals.
Accumulate data from multiple originals scanned in steps for one batch copy.
Automatically rotate image 90 degrees if original orientation differs from loaded paper.
Reduce toner consumption by using lighter copies for trial printing.
Automatically copy originals to sheets of the same size without manual paper selection.
Register and recall up to eight combinations of copy modes and functions.
Configure machine for network printing by connecting cable and setting operations.
Overview of the machine's menu structure and settings.
Print machine default settings, memory capacity, and configuration details.
Manage printing jobs like Quick Copy, Proof-and-Hold, Private Print, and Stored Jobs.
Configure parallel, USB, and network interfaces for data transfer.
Set emulation modes (PCL6, KPDL, etc.) for compatibility with different printers.
Select default fonts, sizes, and character pitch for printing.
Set print options like number of copies, reduction, orientation, and page protect.
Adjust print quality settings including KIR Mode, EcoPrint, Resolution, and Density.
Manage data (fonts, macros, programs) on memory cards.
Perform operations on the optional hard disk for data storage and management.
Configure and use RAM disk for electronic sorting and data storage.
Configure paper settings like tray mode, source, duplex printing, and output destination.
Configure form feed timeout, data dump, function resetting, resource protection, and auto continue.
Set default values for copier and machine settings.
Configure paper size, type, and weight for the multi-purpose tray.
View or print total copy and scan counts as a report.
Print various machine reports for administration and statistics.
Select the language for the message display and operation panel.
Control total copies/prints by setting ID-codes for each account.
Register, edit, or delete accounts and set limits of use.
Browse total counts, output reports, and clear counters for all accounts.
View and clear counters for individual user accounts.
Turn the job accounting function on or off.
Adjust default settings for copier, printer, scanner, and fax job accounting.
Perform copier operation by inputting ID-code for job accounting.
Provides basic specifications, selection guidelines, and paper sizes for the machine.
Definitions of technical terms used in the manual.
To Next Page
