This Operation Guide is for models DCC 2520, DCC 2525 and DCC 2532. In this guide,
DCC 2520 refers to the 25/20 ppm (prints per minutes) model, DCC 2525 to the 32/25 ppm
model and DCC 2532 to the 32/32 ppm model.
NOTE: This Operation Guide contains information that corresponds to using both the inch and
metric versions of these machines.
The inch versions of these machines are shown in the screens in this guide. If you are using the
metric version, use the messages provided for the inch version as reference only. In the body
text, only the inch messages are given if these versions differ only in capitalization. When there
is even a slight difference in the message, we have listed the information for the inch version
followed, in brackets, by the corresponding information for the metric version.
To Next Page
