To Next PageTo Next Page
Need help?Do you have a question about the Triumph Bonneville Bobber and is the answer not in the manual?
General| Displacement | 1200 cc |
|---|---|
| Max Torque | 106 Nm @ 4000 rpm |
| Fuel System | Multipoint sequential electronic fuel injection |
| Final Drive | Chain |
| Clutch | Wet, multi-plate assist clutch |
| Gearbox | 6-speed |
| Frame | Tubular steel cradle |
| Rear Suspension | Mono-shock RSU with linkage |
| Front Tyre | 100/90-19 |
| Rear Tyre | 150/80 R16 |
| Engine Type | Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin |
| Rear Brakes | Single 255mm disc, Nissin single piston floating caliper |
| Seat Height | 690 mm |
| Dry Weight | 228 kg |
| Fuel Tank Capacity | 12 L |
| Exhaust | Brushed 2 into 2 exhaust system with twin silencers |
General safety guidelines for the motorcycle's intended use and restrictions.
Warns against off-road use and towing/sidecars for safety.
Details hazards associated with petrol and exhaust fumes.
Specifies required protective gear for rider and passenger.
Emphasizes helmet choice, fit, and eye protection.
Covers general riding safety, speed, and hazard awareness.
Explains the instrument panel layout, adjustment, and indicator lights.
Explains selection and operation of riding modes and cruise control.
Details various warning lights on the instrument panel and their meanings.
Explains the traction control indicator light and its flashing behavior.
Explains how traction control functions and how to adjust its settings.
Details the usage conditions and warnings for cruise control.
Describes the electronic throttle system and potential malfunctions.
Lists essential daily checks before riding to ensure safety.
Details proper methods for changing gears and braking effectively.
Covers braking techniques, including emergency braking and down changing.
Describes ABS functionality, its warning light, and limitations.
Warns about speed limits and factors affecting stability with accessories.
Provides safety warnings and instructions for passengers on both models.
Introduces the importance of scheduled maintenance and dealer services.
Covers engine oil and cooling system checks and procedures.
Explains inspection and adjustment for throttle, clutch, and drive chain.
Details brake maintenance and inspection of steering and wheel bearings.
Details tyre wear, pressures, and battery system maintenance procedures.
Stresses the vital importance of all maintenance tasks and risks of neglect.
Outlines maintenance schedules and explains service/warning indicator symbols.
Provides a comprehensive table of maintenance tasks and intervals.
Details how to check the engine oil level and associated warnings.
Guides on changing the engine oil and oil filter with safety precautions.
Specifies correct engine oil type, grade, and disposal guidelines.
Introduces the cooling system and explains coolant level inspection.
Details the steps for adjusting the coolant level, including safety warnings.
Recommends coolant changes and covers radiator/hose inspection.
Details safety warnings related to battery acid and explosive gases.
Declares that fitted tyres meet specific safety and quality standards.
