How to Ride the Motorcycle
67
Warning
The ABS warning light will illuminate
when the rear wheel is driven at high
speed for more than 30 seconds when
the motorcycle is on a stand. This
reaction is normal.
When the ignition is switched off
and the motorcycle is restarted, the
warning light will illuminate until the
motorcycle reaches a speed exceeding
19 mph (30 km/h).
Warning
The ABS system operates by
comparing the relative speed of the
front and rear wheels.
Use of non-recommended tyres can
affect wheel speed and cause the ABS
function not to operate, potentially
leading to loss of control and an
accident in conditions where the ABS
would normally function.
Considerations for High
Speed Operation
Warning
This Triumph motorcycle should be
operated within the legal speed limits
for the particular road travelled.
Operating a motorcycle at high speeds
can be potentially dangerous since the
time available to react to given traffic
situations is greatly reduced as road
speed increases.
Always reduce speed in potentially
hazardous driving conditions such as
bad weather or heavy traffic.
Warning
Only operate this Triumph motorcycle
at high speed in closed-course on-
road competition or on closed-course
racetracks.
High speed operation should only
then be attempted by riders who have
been instructed in the techniques
necessary for high speed riding and
are familiar with the motorcycle's
characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.
To Next Page
Loading...
Need help?
General
