Triumph Bonneville Bobber User Manual

Maintenance
102
Front Suspension - Front
Fork Inspection
Warning
Riding the motorcycle with defective
or damaged suspension is dangerous
and may lead to loss of control and an
accident.
Warning
Never attempt to dismantle any part
of the suspension units
All suspension units contain
pressurised oil.
Skin and eye damage can result from
contact with the pressurised oil.
Examine each fork for any sign of
damage, scratching of the slider
surface, or for oil leaks.
If any damage or leakage is found,
consult an authorised Triumph dealer.
To check that the forks operate
smoothly:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness
is detected, consult your authorised
Triumph dealer.

Triumph Bonneville Bobber Specifications

General

Displacement	1200 cc
Max Torque	106 Nm @ 4000 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	6-speed
Frame	Tubular steel cradle
Rear Suspension	Mono-shock RSU with linkage
Front Tyre	100/90-19
Rear Tyre	150/80 R16
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Rear Brakes	Single 255mm disc, Nissin single piston floating caliper
Seat Height	690 mm
Dry Weight	228 kg
Fuel Tank Capacity	12 L
Exhaust	Brushed 2 into 2 exhaust system with twin silencers