Triumph Bonneville Bobber User Manual

How to Ride the Motorcycle
69
Tyres
High speed operation is hard on tyres,
and tyres that are in good condition are
crucial to riding safely. Examine their
overall condition, inflate to the correct
pressure (when the tyres are cold),
and check the wheel balance. Securely
fit the valve caps after checking tyre
pressures. Observe the information
given in the maintenance and
specification sections on tyre checking
and tyre safety.
Parking
Warning
Do not park on a soft or steeply
inclined surface.
Parking under these conditions may
cause the motorcycle to fall over
causing damage to property and
personal injury.
Warning
Petrol is extremely flammable and can
be explosive under certain conditions.
If parking inside a garage or other
structure, be sure it is well ventilated
and the motorcycle is not close to
any source of flame or sparks. This
includes any appliance with a pilot
light.
Failure to follow the above advice may
cause a fire resulting in damage to
property or personal injury.

Triumph Bonneville Bobber Specifications

General

Displacement	1200 cc
Max Torque	106 Nm @ 4000 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	6-speed
Frame	Tubular steel cradle
Rear Suspension	Mono-shock RSU with linkage
Front Tyre	100/90-19
Rear Tyre	150/80 R16
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Rear Brakes	Single 255mm disc, Nissin single piston floating caliper
Seat Height	690 mm
Dry Weight	228 kg
Fuel Tank Capacity	12 L
Exhaust	Brushed 2 into 2 exhaust system with twin silencers