1369
11. Check the direction indicator operation, rectify as necessary.
Perform the following operations:
• Flyscreen - Installation
• Battery - Installation
• Seat - Installation
Rear Direction Indicators – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
The LED units inside the direction indicators are sealed for life units and must be
replaced in the event of a failure.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Rear Wheel - Removal
1. Remove the licence plate.
To Next Page
Loading...
