Triumph Rocket 3 GT 2021 - Page 845

807
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Radiator - Removal
NOTICE
The coolant temperature sensor is located in front of the cylinder head.
Note the routing of the coolant temperature harness for installation.
1. Press the wire locking device fully in and detach the coolant temperature sensor from
the main harness.
2. Remove the rubber cover and using a suitable 19 mm slotted socket, remove the
coolant temperature sensor from the cylinder head and discard the sealing washer.
1. Coolant temperature sensor
2. Sealing washer
3. Thermostat housing