Triumph Rocket 3 GT 2021 - Page 90

62
Torque Wrench Settings
Engine Covers
Application
Torque
(Nm)
Notes
Alternator cover
*
See Alternator Cover - Installation
Alternator cover crankshaft
inspection plug
8 Nm
Apply a thin smear of proprietary high
temp. copper-based grease to the threads
Alternator cover face seal plug
6 Nm
Camshaft cover
*
See Camshaft Cover - Installation
Clutch cover
*
See Clutch Cover - Installation
Clutch cover finisher
10 Nm
M10 sealing plug
8 Nm
Fit new if loosened or removed
M14 sealing plug
18 Nm
Fit new if loosened or removed
M14 sealing plug with washer
25 Nm
Fit new sealing washer(s)
Oil pick-up filter retainer
8 Nm
Fit new fixing(s) if loosened or removed
Oil tank cover
*
See Oil Tank Cover – Installation
Starter drive cover
9 Nm
Starter motor cover
9 Nm
Strainer pickup keeper plate
8 Nm
Fit new fixing(s) if loosened or removed
Sump baffle
8 Nm
Fit new fixing(s) if loosened or removed
Sump M6 x 130 mm bolt
10 Nm
Sump M6 x 30 mm bolt
10 Nm
Sump M6 x 50 mm bolt
10 Nm
Fit new fixing(s) if loosened or removed
Sump M6 x 35 mm screw
8 Nm
Water pump cover
*
See Clutch Cover - Installation