Triumph Rocket 3 GT 2021 - Page 979

941
15. Fit the headstock harness cover and tighten the fixings to 5 Nm.
1. Fixings
2. Harness cover
Perform the following operations:
• Front Subframe - Installation
• Flyscreen - Installation
• Battery - Installation
• Seat - Installation
Lower Yoke and Headstock Bearings – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.