Triumph Speed Triple S - Stopping the Engine

How to Ride the Motorcycle
77
Stopping the Engine
Speed Triple RS
25
8
6
4
2
0
12
14
25.2
mp/h
MM
RPM
x1000
10
N
3
2
1
1. Neutral indicator light
2. Engine stop switch - STOP position
3. Master ignition switch - OFF position (if
fitted)
To stop the engine:
• Close the throttle completely.
• Select neutral.
• Place the engine stop switch in the
STOP position.
• Turn the master ignition switch to
the OFF position (if fitted).
• Select first gear.
• Support the motorcycle on a firm,
level surface with the side stand.
• Lock the steering.
Caution
Do not leave the ignition switched on
with the engine stopped. This will
cause electrical damage.
Stopping the Engine
Speed Triple S
25
8
6
4
2
0
12
14
25.2
mp/h
MM
RPM
x1000
10
N
P
U
S
H
P
O
F
F
O
N
41
3
2
1. Neutral indicator light
2. OFF position
3. Ignition switch
4. Engine stop switch - STOP position
To stop the engine:
• Close the throttle completely.
• Select neutral.
• Turn the ignition switch off.
• Place the engine stop/start switch
in the STOP position.
• Select first gear.
• Support the motorcycle on a firm,
level surface with the side stand.
• Lock the steering.
Caution
The engine should normally be stopped
by turning the ignition switch to the
OFF position.
The engine stop switch is for emergen-
cy use only.
Do not leave the ignition switched on
with the engine stopped. This will
cause electrical damage.