98
Operation Description Odometer Reading in Miles (Km) or Time Period, whichever comes first
First Service Annual
Service
Mileage Based Service
Every 500 (800)
1 month
Ye a r 6,000 and
18,000 (10,000
and 30,000)
12,000
(20,000)
24,000
(40,000)
Headstock bearings - check/adjust - • • • •
Headstock bearings - lubricate - • •
Front and rear suspension - check for leaks/
smooth operation
Day • • • • •
Fork oil - renew - •
Rear suspension linkage - lubricate - • •
Brakes
Brake fluid levels - check Day • • • • •
Brake fluid - renew Every 2 years regardless of mileage
Brake pads - check wear levels Day • • • • •
Brake master cylinders - check for fluid leaks - • • • • •
Brake calipers - check for fluid leaks and seized
pistons
- • • • • •
ABS and immobiliser ECMs - check for stored
DTCs
- • • • • •
Drive Chain
Drive chain - lubricate Every 200 miles (300 km)
Drive chain - wear check Every 500 miles (800 km)
Drive chain slack - check/adjust Day • • • • •
Drive chain rubbing strip - check - • • • • •
General
Engine ECM, Instruments and Keyless ECM -
check for latest calibration download using the
Triumph diagnostic tool
Fasteners - inspect visually for security Day • • • • •
Bank angle indicators - inspect visually for wear Day • • • • •
Side stand/Centre stand - check operation Day • • • • •
Side stand pivot - clean/grease - • • •
Carry out all outstanding Service Bulletin and
warranty work
- • • • • •
Carry out road test - • • • • •
Complete the service record book and reset the
service indicator
- • • • • •
To Next Page
