97
Maintenance and Adjustment
To remove the position light bulb:
Without pulling on the wires, ease the bulb
holder from its socket. The bulb is removed
from its holder by pulling gently upwards.
1. Headlight bulb
2. Bulb clip
3. Position light bulb
Installation for both bulbs is the reverse of the
removal procedure. Tighten the headlight
clamp to 3Nm.
Rear Light
Rear Light Replacement
The rear light unit is a sealed, maintenance
free LED unit.
Indicator Lights
Bulb Replacement
1. Screwdriver
Use a flat bladed screwdriver to carefully
remove the lens from the indicator to gain
access to the bulb for replacement.
When reconnecting the battery, connect
the positive (red) lead first.
Do not reconnect the battery until the
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
To Next Page
Loading...
