Need help?Do you have a question about the Trocen AWC7824 and is the answer not in the manual?
General| Brand | Trocen |
|---|---|
| Model | AWC7824 |
| Category | Security Sensors |
| Language | English |
Details the capabilities and specifications of the AWC7824 motion controller.
Compares the AWC78XX series models, highlighting differences in hardware and functions.
Explains key terms and abbreviations used throughout the manual.
Details the AWC7824 accessories and their connection diagrams.
Provides electrical wiring diagrams for the control system.
Describes the various ports on the wiring board, including input and output signals.
Details the U Disk, USB, Ethernet, and Panel interfaces on the mainboard.
Overview of the main interface screen and its layout.
Explains the purpose and operation of various function keys on the interface.
Describes the directional keys for controlling axis movement.
Details various display areas like processing time, status, and coordinates.
Covers file operations, origin management, and parameter settings.
Configuration of manufacturer-specific parameters for axes and laser.
Guides on configuring network connections for the controller.
Details on Autofocus, Origin setting, and continuing previous work.
Troubleshooting common problems related to U disk recognition.
Explains prompts related to engraving or cutting beyond the defined border limits.
Addresses prompts related to limit switches and missing files.
Covers prompts for continuing work and protection mechanisms like water protection.
Step-by-step guide for installing and debugging the motion controller.
Outlines the fundamental steps for operating the laser machine to cut graphics.
To Next Page
