Need help?Do you have a question about the Trocen AWC78 Series and is the answer not in the manual?
Provides an overview of the AWC7813 motion controller and its features.
Details the key features and capabilities of the AWC7813 motion controller.
Compares the AWC7813 with other models in the AWC78XX series.
Defines technical terms and abbreviations used in the manual.
Lists the components included with the AWC7813 motion controller.
Illustrates the physical appearance and dimensions of the control panel.
Shows the physical appearance and dimensions of the wiring board.
Describes the hardware interfaces and connections of the motion controller.
Illustrates the overall electrical wiring diagram for the control system.
Details the ports and wiring diagrams for the wiring board unit.
Explains the various interfaces available on the mainboard.
Introduces the human machine interface (HMI) and its components.
Shows a preview and layout of the main operational interface.
Describes the area containing function keys for controlling operations.
Explains the area used for controlling axis movement directions.
Details the various display areas on the HMI, such as status and coordinate.
Covers procedures for managing files on the controller.
Guides on transferring files via U disk and upgrading the mainboard.
Explains how to manage origin points for axis positioning.
Details how to configure motion parameters for the controller.
Covers common operational parameters and their settings.
Provides access to manufacturer-specific parameter settings.
Explains how to configure network settings for communication.
Details how to change the language and check the system version.
Guides on performing input and output signal tests.
Covers functionality for cutting boxes and resetting axes.
Explains how to control axis movement using the panel keys.
Details Z AutoFocus, setting origin, and continuing previous work.
Information on compatible U disk formats and requirements.
Explanation for the 'Engrave beyond border limit!' prompt.
Explanation for the 'Beyond border limit! Continue?' prompt.
Explanation for the 'Beyond border limit!' prompt.
Explanation for the 'Trigger limit!' prompt.
Explanation for the 'No file!' prompt.
Explanation for the 'To select the file!' prompt.
Explanation for the 'Continue to work?' prompt.
Reason for speed slowdown when rotary engraving is enabled.
Explanation for the 'water protect!' prompt.
Explanation for the 'opened protected!' prompt.
Step-by-step guide for installing and debugging the machine.
Basic operational steps for using the laser machine to cut graphics.
General| Operating Voltage | 9-16VDC |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Antimask Function | Yes |
| Detection Principle | Infrared |
| Detection Range | 12m |
| Output Type | NC/NO |
| Mounting Height | 2.2m |
To Next Page
