AWC7813 motion controller user manual
Figure4-8 "Continue to work?"
4.9 Why does the button movement speed slow down
after turning on the rotary engraving function?
For details, see Table3-15-4 Rotate Engraving & Cutting Instruction.
4.10 Why does the prompt "water protect!" appear
When the 【 Laser 1 water protect 】 function is turned on, the mainboard
detects the WP1 signal during the operation of the machine, and it will prompt
"Water protect!", then please check the water protection switch. For details, see
3.16.2.6 Laser 1 Water Protect.
To Next Page
Loading...
Need help?
General
