Trocen AWC78 Series User Manual

AWC7813 motion controller user manual
WWW.SZTROCEN.COM
2
1. Product Description
1.1 Features
AWC7813 is a general-purpose motion controller used in laser cutting, laser
engraving and other fields, suitable for all kinds of small and medium power laser
cutting and engraving equipment. AWC7813 motion controller works with LaserCAD
software.
AWC7813 motion controller has the following features:
 5-inch TFT LCD touch screen, intuitive and simple operation interface
 One road laser control
 Three-roads motion axis control (X axis, Y axis, Z axis)
 Using high-speed DSP main control chip, fast calculation speed, advanced
motion algorithm
 All optocouplers isolate external electromagnetic interference, and the system
works stably and reliably
 Support Udisk, network and USB communication methods
 Support Z-axis auto focus, Y-axis dual drive function
 Support full blowing, work blowing, layer blowing
1.2 AWC78XX Series Comparison

Trocen AWC78 Series Specifications

General

Brand	Trocen
Model	AWC78 Series
Category	Security Sensors
Language	English