Need help?Do you have a question about the Trocen AWC708S and is the answer not in the manual?
Introduction to the AWC708S controller, its features, and system components.
Explanation of key terms and definitions used in the manual.
Procedure for unpacking the product and checking for complete accessories.
Overview of the controller's LCD display, soft keys, and U disk slot.
Detailed descriptions of function and direction keys on the control panel.
Appearance, port instructions, and wiring for the main control board.
Guidance for installing and using the associated LaserCAD software.
Steps for hardware connection and testing input signals for proper function.
Setting origin points, axis direction, pulse distance, and operational range.
Explanation of the main interface display elements and their functions.
Detailed functions available from the main page, including file, count, and working properties.
Managing files, configurations, and upgrades via U disk.
Settings for origin management, jog control, and cut box definition.
Configuration of axes control, motion parameters, and common settings.
Network, language, and system version configuration options.
Detailed configuration of parameters for X, Y, and Z axes.
Configuration for laser parameters, input/output signals, and protection.
Setting auto reset, hard limits, and other system functions.
Answers to common questions regarding panel display, file naming, and battery.
Wiring diagrams and settings for Panasonic A5 servo drivers.
Wiring diagrams and settings for Yaskawa Sigma servo drivers.
Wiring diagrams and settings for Delta A Series servo drivers.
Wiring diagrams and settings for Schneider 23A Series servo drivers.
General| Brand | Trocen |
|---|---|
| Model | AWC708S |
| Category | Security Sensors |
| Language | English |
To Next Page
