Need help?Do you have a question about the Trojan HYDROLINK SNAKE and is the answer not in the manual?
Warnings about explosive battery gases. Avoid smoking, sparks, and flames; ensure ventilation.
Hazards of lead-acid batteries, including acid spill precautions and first aid for contact.
Risks of electric shock from batteries. Use insulated tools and avoid metal jewelry when working.
General safety advice for servicing, including clothing, eye protection, and hot surfaces.
Lists the components included in the HydroLink Watering System kit, such as tubing and couplers.
Reinforces acid/gas hazards. Requires eye protection and avoidance of sparks/flames near batteries.
Instructions for checking electrolyte levels before installation, addressing low and overfilled conditions.
Guide on connecting the Snake tubing to HydroLink vents, ensuring a secure click for proper installation.
Procedure to remove existing vent caps and install HydroLink vents onto the battery terminals.
Ensuring HydroLink vents are fully seated to prevent electrolyte spillage, using hands only.
Details on connecting Snake tubing to HydroLink vents, emphasizing the click for correct installation.
Emphasizes water quality for battery and HydroLink system life. Check new batteries periodically.
Critical warning against watering batteries before full charge to prevent boil-over and damage.
Specifies use of distilled/deionized water only, warning against tap water contaminants.
Key points for successful HydroLink operation: approved water supply, following procedures, and regular maintenance.
Reiterates filling batteries only when fully charged to prevent boil-over, bodily injury, and damage.
Advises against removing installed HydroLink vents; provides guidance if removal becomes necessary.
Procedure to check water supply flow rate, requiring a minimum of 2 GPM for proper system operation.
Instruction to remove the dust cover from the HydroLink snake before connecting the water supply.
Guide on connecting the male coupler of the HydroLink system to the female coupler on the water supply.
How to monitor the flow indicator to confirm water entry and completion of the filling process.
Procedures for disconnecting the water supply after filling, emphasizing timing to avoid over/underfilling.
Critical warning for immediate disconnection if a valve fails during filling to prevent acid overflow and damage.
Instruction to replace the dust cover on the male coupler after use, with a tip for a secure fit.
Description of the hand pump water supply for 1-2 vehicles and its operation using distilled water.
Recommendation to check electrolyte levels in each cell after three months of system operation for accuracy.
Maintenance task to clean/replace filters/strainers on water supplies to maintain proper flow rates.
Maintenance task to check tubing connections and couplers for secure, leak-free, and proper attachment.
Instructions for draining and storing water supplies exposed to freezing temperatures to prevent damage.
Seasonal maintenance steps for vehicles stored for extended periods, including a brief flush upon return to service.
Specifies flow rate, pressure range, and temperature range for the HydroLink watering system.
Specifies inlet pressure range and temperature range for the water supply used with the system.
Details the four-year limited warranty for manufacturing defects in the HydroLink Watering System.
Instructions for submitting a warranty claim, including required documentation and return procedures.
Lists exclusions from the warranty, such as transportation costs and consequential damages.
Explains that the warranty confers specific legal rights that may differ from state to state.
Lists the items needed for a warranty claim: proof of purchase, date codes, problem description, and product return.
Specifies that Trojan Battery is not responsible for expenses like transportation, installation, or loss of use.
Explains that the warranty grants specific legal rights that may vary from state to state.
Example showing warranty coverage when HydroLink fails within the battery's warranty period.
Example showing warranty coverage when HydroLink fails after the battery's warranty period.
Warnings about explosive battery gases. Avoid smoking, sparks, and flames; ensure ventilation.
Hazards of lead-acid batteries, including acid spill precautions and first aid for contact.
Risks of electric shock from batteries. Use insulated tools and avoid metal jewelry when working.
General safety advice for servicing, including clothing, eye protection, and hot surfaces.
Lists the components included in the HydroLink Watering System kit, such as tubing and couplers.
Reinforces acid/gas hazards. Requires eye protection and avoidance of sparks/flames near batteries.
Instructions for checking electrolyte levels before installation, addressing low and overfilled conditions.
Guide on connecting the Snake tubing to HydroLink vents, ensuring a secure click for proper installation.
Procedure to remove existing vent caps and install HydroLink vents onto the battery terminals.
Ensuring HydroLink vents are fully seated to prevent electrolyte spillage, using hands only.
Details on connecting Snake tubing to HydroLink vents, emphasizing the click for correct installation.
Emphasizes water quality for battery and HydroLink system life. Check new batteries periodically.
Critical warning against watering batteries before full charge to prevent boil-over and damage.
Specifies use of distilled/deionized water only, warning against tap water contaminants.
Key points for successful HydroLink operation: approved water supply, following procedures, and regular maintenance.
Reiterates filling batteries only when fully charged to prevent boil-over, bodily injury, and damage.
Advises against removing installed HydroLink vents; provides guidance if removal becomes necessary.
Procedure to check water supply flow rate, requiring a minimum of 2 GPM for proper system operation.
Instruction to remove the dust cover from the HydroLink snake before connecting the water supply.
Guide on connecting the male coupler of the HydroLink system to the female coupler on the water supply.
How to monitor the flow indicator to confirm water entry and completion of the filling process.
Procedures for disconnecting the water supply after filling, emphasizing timing to avoid over/underfilling.
Critical warning for immediate disconnection if a valve fails during filling to prevent acid overflow and damage.
Instruction to replace the dust cover on the male coupler after use, with a tip for a secure fit.
Description of the hand pump water supply for 1-2 vehicles and its operation using distilled water.
Recommendation to check electrolyte levels in each cell after three months of system operation for accuracy.
Maintenance task to clean/replace filters/strainers on water supplies to maintain proper flow rates.
Maintenance task to check tubing connections and couplers for secure, leak-free, and proper attachment.
Instructions for draining and storing water supplies exposed to freezing temperatures to prevent damage.
Seasonal maintenance steps for vehicles stored for extended periods, including a brief flush upon return to service.
Specifies flow rate, pressure range, and temperature range for the HydroLink watering system.
Specifies inlet pressure range and temperature range for the water supply used with the system.
Details the four-year limited warranty for manufacturing defects in the HydroLink Watering System.
Instructions for submitting a warranty claim, including required documentation and return procedures.
Lists exclusions from the warranty, such as transportation costs and consequential damages.
Explains that the warranty confers specific legal rights that may differ from state to state.
Lists the items needed for a warranty claim: proof of purchase, date codes, problem description, and product return.
Specifies that Trojan Battery is not responsible for expenses like transportation, installation, or loss of use.
Explains that the warranty grants specific legal rights that may vary from state to state.
Example showing warranty coverage when HydroLink fails within the battery's warranty period.
Example showing warranty coverage when HydroLink fails after the battery's warranty period.
General| Brand | Trojan |
|---|---|
| Model | HYDROLINK SNAKE |
| Category | Lawn and Garden Equipment |
| Language | English |
To Next Page