To Next PageTo Next Page
Need help?Do you have a question about the Trojan POWER GYM 150 and is the answer not in the manual?
Consult physician before exercise, stop if faint, warm-up/cool-down advised.
Attach Weight Guide Tubes to Rear and Front Base Frames using bolts and nuts.
Install Rubber Rings, Weight Plates, Selector Shaft Bushing, and Top Weight Plate.
Connect Support Frame and Single Pulley Blocks to the Front Base Frame.
Attach Front Support Frame and Seat Base Frame to the main frame structure.
Mount Upper Cross Beam, Leg Extension Frame, and Seat Base Frame.
Attach Back and Seat Cushions, insert Foam Tubes and Leg Rollers.
Connect Press Bar, Butterfly Arms, and Handle Tubes to the upper structure.
Thread Upper Cable through pulleys and attach to frame components.
Assemble Butterfly Cable, attach pulleys and hooks to blocks and frame.
Consult physician before exercise, stop if faint, warm-up/cool-down advised.
Attach Weight Guide Tubes to Rear and Front Base Frames using bolts and nuts.
Install Rubber Rings, Weight Plates, Selector Shaft Bushing, and Top Weight Plate.
Connect Support Frame and Single Pulley Blocks to the Front Base Frame.
Attach Front Support Frame and Seat Base Frame to the main frame structure.
Mount Upper Cross Beam, Leg Extension Frame, and Seat Base Frame.
Attach Back and Seat Cushions, insert Foam Tubes and Leg Rollers.
Connect Press Bar, Butterfly Arms, and Handle Tubes to the upper structure.
Thread Upper Cable through pulleys and attach to frame components.
Assemble Butterfly Cable, attach pulleys and hooks to blocks and frame.
General| Weight Stack | 150 lbs |
|---|---|
| Maximum User Weight | 300 lbs |
| Material | Steel frame |
| Color | Black |
| Included Accessories | Lat Bar, Ankle Strap |
