06
a). Fuzzy Logic mode counters rising or falling CO2 levels by quickly activating the CO2 solenoid valve,
allowing CO2 levels to be controlled more precisely.
b). The Fuzzy Logic function is active if the Fuzzy Logic LED indicator illuminates.
c). Factory default setting of fuzzy logic is off.
To activate the fuzzy logic, press buttonn 5 times, the Fuzzy Logic LED indicator will be
blinking. Press or , the LED displays OFF. Press or , the LED displays ON. Press
button to confirm and activate the fuzzy logic and the Fuzzy Logic LED indicator will illuminate.
d).This function can be used ONLY with compressed CO2.
e).Do not use Fuzzy Logic with a CO2 generator!!!
6.Fuzzy Logic Mode
To Next Page
Loading...
