To Next PageTo Next Page
Need help?Do you have a question about the Tronair 02-0536C0110 and is the answer not in the manual?
Details the intended purpose and application of the aircraft jack.
References the location of parts lists and illustrations for the jack.
Information on the jack's alarm and warning system features.
Describes the warning and danger signs present on the jack unit.
Details the safety features built into the jack's components.
Explains the safety functionalities of the jack's operational systems.
Highlights features designed to ensure operator safety during use.
Information regarding the environmental safety aspects of the jack.
Describes the protection systems integrated into the jack.
Details the closed circuit systems within the jack.
Explains any interlocking mechanisms present on the jack.
Specifies the essential personal protective equipment (PPE) required.
Provides essential safety guidelines for operating the jack.
Outlines the conditions necessary for the safe operation of the jack.
Defines the required qualifications and training for jack operators.
Lists supplementary safety measures and precautions.
Instructions for actions to take in case of hydraulic line failure.
Details the requirements for packaging the jack for shipment.
Instructions on how to handle the jack during packaging and storage.
Guidelines for strapping the jack during shipment.
Information on protective materials for packaging.
Specifies the labeling requirements for packaged units.
Considerations for storing the jack with other items.
Defines the recommended environmental conditions for storage.
Information on space requirements and handling facilities for storage.
Provides general instructions for assembly or repair.
Lists essential checks to perform before using the jack.
Specifies the qualifications needed for personnel performing assembly.
Details the procedures for inspection and testing the jack.
Specifies the required air supply pressure and connections.
Defines the parameters and conditions for jack operation.
Lists key numerical specifications and values for the jack.
Identifies and describes the operator controls on the jack.
Provides instructions for the safe and correct operation of the jack.
Lists general rules and guidelines for operating the jack.
Step-by-step instructions for operating the jack, including pin placement.
Provides general guidelines and practices for maintenance and repair.
Outlines the recommended maintenance schedule for the jack.
Specific maintenance recommendations for jacks in storage or with low usage.
Detailed procedures for servicing and disassembling the jack.
Instructions for removing and servicing the hydraulic pump.
Procedure for performing a load test on the jack's function.
Information regarding the pneumatic pump component.
Provides a hydraulic schematic diagram of the jack's system.
Contains the manufacturer's declaration of conformity to standards.
Lists parts specifically for the HC-1948 Hand Pump.
Manufacturer's data for the Haskel Air Pump component.
Safety Data Sheet for the MIL-PRF-5606 Hydraulic Fluid used.
Provides a detailed maintenance schedule for the jacks.
Routine inspection checklist for 90-day preventative maintenance.
Procedures for annual maintenance, including load testing.
General
