GB/IE/NI 21
The mobile device is already fully charged.
Take away the fully charged device for use, until its internal
battery was drained again. Then put device back to Qi
charging surface
4
for charging.
The mobile device has become very hot as a result of
charging.
Remove the mobile device from the Qi charging surface
4
for a few hours to let it cool down, and also check if your
product was damaged.
This product is in a location where strong radio waves or
noise is being generated, such as TV towers, electric power
plants, or gas stations.
Under this environment, use other output ports, such as USB
type C or type A ports for charging up your mobile device.
The power bank is not being charged.
It may be that the power bank is not connected properly.
Check that it is connected.
In order to charge the power bank, use a power supply
with an output voltage and curernt matching the rated input
voltage and current as stated in “Technical specifications“
of this user manual.
A connected device is not being charged.
The battery is drained.
Charge the battery.
The device is not connected.
The device is not connected. Check that it is connected.
Briefly press the On/off button
3
to begin the charging
process.
To Next Page
Loading...
Need help?
General
