GB/IE/NI 23
P Cleaning and care
This product has no internal parts requiring maintenance.
Moisture entering the product may result in damage.
Do not wipe the Qi charging surface
4
with oils, alcohol,
benzine, thinners, etc. or expose it to hair sprays, insecticide
sprays, etc
If the Qi charging surface
4
becomes dirty, wipe off the
dirt using a clean damp cloth.
Ensure no moisture enters the product during cleaning to
prevent damaging the product beyond repair.
Do not use abrasive, solvent-based or aggressive cleaners.
These can damage the surface of the product.
Only clean the product with a slightly damp cloth and mild
washing-up liquid.
P Storage during non-use
Store the product in a dry dust-free location, protected from
direct sunlight.
If the product is not used for a long time, the built-in
battery should be fully charged to prolong its operating
life. Regularly charge the built-in battery if you do not use
the product for a long period of time. This is necessary to
preserve the battery.
P Disposal
Packaging:
The packaging is made of environmentally friendly materials,
which may be disposed of through your local recycling
facilities.
Observe the marking of the packaging materials for
waste separation, which are marked with
abbreviations (a) and numbers (b) with following
To Next Page
Loading...
Need help?
General
