Tronic TKHU 2 A2 User Manual

■ 14
│
GB
│
IE TKHU 2 A2
♦ To remove the car cradle, pull the lever 1 towards
the car cradle and hold it in place.
♦ Unhook the hook 2 and pull it through the ventila-
tion slots.
Inserting your mobile phone into the
car cradle
♦
Back
Press the PRESS button 7 on the rear of
the device and the fixer grips 6 of the
car cradle automatically move outwards.
♦ Place your mobile phone on the supports 8 of the
car cradle.
♦ Push the car cradle fixer grips 6 inwards until the
mobile phone is held firmly in place.
♦ Press the PRESS button 7 to remove the mobile
phone from the car cradle.
Charging the mobile phone
♦ Connect the car USB adapter 0 to your vehicle’s
on-board power supply (cigarette lighter). The
operating LED e lights up white to indicate that
the car USB adapter 0 is ready for use. It is
possible that the ignition has to be switched on
first depending on the vehicle type.

Tronic TKHU 2 A2 Specifications

General

Brand	Tronic
Model	TKHU 2 A2
Category	Automobile Accessories
Language	English