■ 16
│
GB
│
IE TKHU 2 A2
Troubleshooting
A connected device will not charge (the white
operating LED e does not light up).
♦ No connection to the car’s cigarette lighter socket.
Check the connection.
♦ Depending on the vehicle type, it is possible that
the ignition has to be switched on first.
The white operating LED e goes out after a
device has been connected
♦ The car USB adapter 0 is overloaded and will no
longer charge attached devices. The internal over-
current protection has been triggered. Disconnect
all connected devices from the car USB adapter 0.
The white operating LED e lights up immediately
and the car USB adapter 0 is ready for use again.
NOTE
► If you cannot solve the problem with the suggest-
ed solutions, please contact the Service Hotline
(see section Service).
To Next Page
Loading...
Need help?
General
