GB/IE/NI 17
displayed during the charging process by the LED indicator
for battery capacity
7
.
To end the charging process, disconnect the USB charging
cable from the mobile device and the power bank
3
. The
power bank will switch OFF after approx. 30 seconds.
Or simply double click with ON / OFF button
6
. The
power bank and the LED indicator for battery capacity
7
will switch off.
NOTE:
1. If you use all the USB ports, a voltage of 5 V will output at
the outputs. The maximum output current must not exceed
3.0 A for all outputs. If all USB outputs are used, fast charge
is not possible.
2. If USB type A output
2
or PD port
1
is in quick charge
or PD mode, and another USB port is connected to another
device for charging, the quick charge mode or PD mode
will be terminated and switched to normal charge mode. All
devices will now be charged at 5 V each.
P Troubleshooting
= Problem
= Cause
= Solution
The power bank
3
is not being charged.
It may be that the power bank is not connected properly.
Check that it is connected.
To Next Page
Loading...
Need help?
General
