BLUETOOTH
Turn ON the speaker and wait for the blue LED light to
flash and
then activate the Bluetooth in your device.
Go to device’s Bluetooth
settings, scan for new
Bluetooth devices and upon discovering the device
‘Tronsmart Element Force’ click to pair with it. Hold
Mode button for2 seconds to disconnect the Bluetooth.
TWS MODE
What is TWS?
TWS is true wireless stereo which means two Force
Bluetooth Speakers are able to be paired to play music
simultaneously to provide stereo surround sound.
How to pair two Force speakers?
1. Turn ON two speakers and confirm they are
disconnected to any Bluetooth device.
2. Hold EQ button for 2 seconds on one speaker, then
you will hear
a voice prompt which means it has
entered TWS pairing mode
and will pair with each
other automatically. After connecting
successfully, you
will hear a sound prompt from two speakers and
the
blue LED light of right channel is steady ON while the
blue light
of left channel is flashing.
3. Go to device’s Bluetooth settings, scan for ‘Tronsmart
Element Force’
and click to pair with it. The blue lights of
two speakers being steady
ON means the connection to
Bluetooth device is successful. And
then start to play
music to enjoy stereo surround sound.
4. If the speaker used to be paired in TWS mode, it is
suggested to hold
the Mode button for 5-7 seconds to
reset and reboot the speaker.
Then restart to pair
another new Element Force speaker according
to the
above instructions.
05