RESET
Hold the “Mode” button for 6-8 seconds until the speaker
is powered
OFF automatically to reset to factory
setting if the speaker
malfunctions. It can help to clear
all pairing records from the speaker.
After resetting you need to connect it to your
Bluetooth device manually like first time you did.
SLEEP MODE
The Force speaker will go into Sleep Mode after 15
minutes to save
battery power if it does not pair with
any device through Bluetooth
. When you need to use
it, press
the Power ON/OFF button to turn it on.
TIPS
Because of the powerful output of this speaker,
please do not be
too close to the speaker and keep an
appropriate distance away to
listen to the music. To
avoid any discomfort caused by excessive
sound, it is
recommended to listen to music at a suitable volume.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO INSTRUCTIONS.
LED
Bluetooth: Blue light flashes slowly for pairing. Blue
light kept ON
for connected successfully.
Micro SD/TF
& AUX-IN: Blue light kept ON.
Charging: Red light ON for charging. Red light goes
OFF for
charging completion. Red light flashes for low
battery warning.
07