TroposAir Tuscan HE-15073 User Manual

Owner’s ManualOwner’s Manual
Tuscan
Toll Free 1-855-676-7247
WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout.
Net Weight
7.9 KGS
9.2 LBS
These instructions contain 5 pages:
Page 1: Foreword
Page 2: Unpack and inspect parts contained, and pre-installation notes
Page 3: Hanging system installation
Page 4: Wiring connections and Canopy and Blade installation
Page 5: Light/Cover installation and Remote Setting
Model No:
HE-15073

TroposAir Tuscan HE-15073 Specifications

General

Model	HE-15073
Category	Fan
Blade Size	52 inches
Number of Blades	5
Speed Settings	3
Material	Metal
Type	Ceiling Fan
Oscillation	No
Remote Control	Yes
Mounting Type	Ceiling
Warranty	Lifetime

Summary

Foreword

Safety and Installation Precautions

Hanging System Installation

Installing Mounting Bracket

Install mounting bracket to ceiling outlet box using screws and washers from the hardware bag.

Installing Downrod and Yoke

Assemble downrod, yoke, and canopy, feeding wires through the downrod.

Hanging the Fan Assembly

Lift fan assembly onto the mounting bracket and rotate to engage the groove.

Receiver Installation

Inserting Receiver into Mounting Bracket

Insert the receiver into the mounting bracket, avoiding squeezing wires.

Wiring Connections

Canopy Installation

Installing the Canopy

Install canopy onto mounting bracket using pre-installed screws and keyholes.

Blade Installation

Installing the Blades

Align blades with blade arms and secure using blade screws and washers.

Light/Cover Installation

Installing the Light Pan

Mount light pan to motor assembly using screws and keyholes.

Connecting the LED

Connect the LED wire connector and secure the light pan.

Installing the Clear Lens

Install clear lens onto light pan, securing with screws.

Installing the Light Cover

Rotate light cover clockwise onto motor assembly to secure.

Remote Setting

Preparing Remote Control

Install batteries into the remote transmitter.

Remote Pairing Process

Pair transmitter and receiver by turning power off/on and pressing learn button.