3 EN
Operating manual – Pyrometer BP17
Information about the device
Device description
The pyrometer BP17 uses an infrared sensor to measure
surface temperatures without contact. An integrated laser
pointer serves for the determination of the measuring spot.
For temperature measurements sensitivity levels of 1 °C, 3
°C
and 5 °C can be preselected – depending on a reference
temperature. Exceeding or falling below this preselected
threshold is indicated by an acoustic and visual alarm function.
The display can be illuminated as needed.
An automatic switch-off saves the battery.
Device depiction
No. Designation
1 Threshold value selector switch
2 Laser pointer
3 Infrared sensor
4 Battery compartment with cover
5 Measurement button
6 Lamp button
7 °C/°F button
8 Laser button
9 Display
10 LED for alarm function
Display
No. Designation
11 Reference indication
12 Battery status
13 Laser indication
14 SET indication
15 Indication of the set threshold value (1 / 3 / 5 °C)
16 °C / °F indication
17 Measurement value display
18 HOLD indication
19 SCAN indication
20 Referance value display
To Next Page
Loading...
Need help?
General
