Trotec BP17 User Manual

EN 6
Operating manual – Pyrometer BP17
Example:
The reference value amounts to 25°C and the selector switch
for the threshold(1) is set to 3°C.
• The measured temperature is between 22°C and 28°C:
The LED is illuminated in green.
• The measured temperature amounts to more than 28°C:
The LED is illuminated in red and an acoustic signal can be
heard at frequent intervals.
• The measured temperature amounts to less than 22°C:
The LED is illuminated in blue and an acoustic signal can
be heard at long intervals.
Switching the laser pointer on or off
Ex works the laser pointer is switched off.
• Please observe that with a switched-on laser pointer the
laser will go on as soon as you press the measurement
button(5).
Danger!
Class 2 laser radiation.
Lasers of class 2 only radiate in the visible range and
during continuous wave operation (lasting beam) no
more than 1 milliwatt (mW) of output will be emitted.
Looking directly into the laser beam for a longer period
of time (more than 0.25seconds) can cause damage to
the retina.
Avoid looking directly into the laser beam. Never look
into the laser beam using optical aides. Do not
suppress the winking reflex when looking into the laser
beam unintentionally. Never point the laser beam at
people or animals.
1. Press the laser button(8).
ð The HOLD indication(13) appears on the display.
ð The laser pointer is switched on.
2. Press the laser button(8) again to switch the laser pointer
off.
ð The laser indication(13) is no longer displayed.
ð The laser pointer is switched off.
Switching the display illumination on or off
Ex works the display illumination is switched off.
1. Press the lamp button(6).
ð The display illumination will be switched on.
2. Press the lamp button(6) again to switch the display
illumination back off.
ð The display illumination will be switched off.
The device memorizes the selected setting when switching off.
Changing the unit °C / °F
1. Press the °C/°F button(7) to change the temperature unit
from degrees Celsius to degrees Fahrenheit or vice versa.
Switching the device off
• With activated SCAN indication(19) the device switches off
automatically after approx. 6minutes.
• With activated HOLD indication(18) the device switches off
automatically after approx. 15seconds.
1. Press the measurement button(5) for approx. 3s.
ð The device is switched off.

Trotec BP17 Specifications

General

Brand	Trotec
Model	BP17
Category	Measuring Instruments
Language	English