Need help?Do you have a question about the Trotec bz30 and is the answer not in the manual?
General| Resolution temperature | 0.1 °C |
|---|---|
| Resolution humidity | 0.1% RH |
| Protection Class | IP20 |
| Measuring range wet-bulb temperature | -20 to +60 °C |
| Functions | Temperature, humidity measurement |
| Sensor type | Temperature and humidity sensor |
| Storage Temperature | +70 °C |
General warnings, usage restrictions, and handling instructions for safe operation.
Information on the correct and specified usage of the device.
Details on specific risks like electrical voltage, explosions, and suffocation.
Detailed specifications of the device's parameters and performance.
Step-by-step instructions for inserting the device's battery.
Procedure for connecting the device to the mains power.
How to enable and use the CO2 alarm function.
Process to set a new CO2 limit value for the alarm.
Steps to start recording measured values.
Overview of the included multi-data logger software.
Configuration of logger settings like time, sampling rate, and alarms.
Options for automatic or manual data recording start.
Setting the CO2 limit value for triggering alarms.
To Next Page
