Trotec pac 2000 e - Information about the Device

4 EN
local air conditioner PAC 2000 E
Information about the device
Device description
The device serves the purpose of cooling the room air. It further
filters and dehumidifies the air thus creating an agreeable room
climate.
The unit cools the room air by withdrawing warmth. The
absorbed warmth is emitted to the outside via the exhaust air
hose; cooled air is fed to the installation site by means of a fan.
Accumulating condensate drips from the evaporator onto the hot
condenser, there it evaporates and then is transported to the
outside via the exhaust air hose.
In ventilation mode the device provides the opportunity of air
circulation without cooling effect.
In dehumidification mode moisture is withdrawn from the air.
The device operates fully automatically and features a variety of
further options. The device can, for instance, be switched on or
off automatically with time delay via the timer function.
Operation of the device is possible either via the control panel at
the device or via the supplied infrared remote control.
The device was designed for universal and flexible application.
Due to its compact dimensions it can be easily transported and
used in all interior spaces.
Device depiction
1
2
3
4
5
6
5
7
4
8
9
10
No. Designation
1 Control panel
2 Air outlet with ventilation flaps
3 Wheel
4 Air inlet with air filter
5 Air inlet
6 Condensate outlet with rubber stopper
7 Exhaust air hose connection
8 Power cable holder
9 Compartment for the remote control
10 Remote control