To Next PageTo Next Page
Need help?Do you have a question about the Trotec Speedy C100 and is the answer not in the manual?
Provides essential safety guidelines for operating and servicing the laser engraver.
Details material restrictions and fume handling requirements for safe laser operation.
Explains laser safety classes (I to IV) and their implications for user protection.
Discusses risks associated with laser radiation and requirements for system registration.
Describes the integrated safety interlock system and its function in preventing hazardous exposure.
Highlights electrical hazards and emphasizes unplugging power during service.
Lists necessary tools and essential information for performing laser beam alignment.
Explains laser tube types, operation, and common reasons for replacement.
Lists necessary tools and safety precautions for measuring laser power.
Details the steps for measuring laser power using the power meter and software.
Provides step-by-step instructions for replacing 12W and 25W laser tubes.
Details the procedure for replacing 50W and 100W laser tubes, including liquid cooling.
Explains the importance of servicing the X-axis and its consumable parts.
Provides initial steps for removing the X-axis assembly from the machine.
Details the process of dismantling the X-axis motor and its related components.
Instructions for releasing and replacing the main belt for the X-axis.
Guides on replacing ball bearings, gearing assembly, and motor belt.
Explains how to correctly tension the X-gearing belt by measuring spring length.
Provides essential safety guidelines for operating and servicing the laser engraver.
Details material restrictions and fume handling requirements for safe laser operation.
Explains laser safety classes (I to IV) and their implications for user protection.
Discusses risks associated with laser radiation and requirements for system registration.
Describes the integrated safety interlock system and its function in preventing hazardous exposure.
Highlights electrical hazards and emphasizes unplugging power during service.
Lists necessary tools and essential information for performing laser beam alignment.
Explains laser tube types, operation, and common reasons for replacement.
Lists necessary tools and safety precautions for measuring laser power.
Details the steps for measuring laser power using the power meter and software.
Provides step-by-step instructions for replacing 12W and 25W laser tubes.
Details the procedure for replacing 50W and 100W laser tubes, including liquid cooling.
Explains the importance of servicing the X-axis and its consumable parts.
Provides initial steps for removing the X-axis assembly from the machine.
Details the process of dismantling the X-axis motor and its related components.
Instructions for releasing and replacing the main belt for the X-axis.
Guides on replacing ball bearings, gearing assembly, and motor belt.
Explains how to correctly tension the X-gearing belt by measuring spring length.
General| Resolution | Up to 1000 dpi |
|---|---|
| Cooling | Air-cooled |
| Laser Type | CO2 |
| Max Speed | 2.5 m/s |
| Interface | USB |
| Supported Materials | Acrylic, Fabrics, Glass, Leather, Plastics, Wood |
| Software | JobControl |
| Power Supply | 50-60 Hz |
