Trotec TDS 10 M Operating Manual

EN 4
Operating manual – ceramic heater TDS 10 M / TDS 20 M
Overheating protection
The device is provided with a safety thermostat which is
activated by overheating of the device (when exceeding the
operating temperature).
Once the safety thermostat has switched itself on, the heating
will be turned off. The fan keeps running.
When the device has cooled down sufficiently, the heating will
be switched back on.
Investigate the cause of overheating.
If the safety thermostat does not switch in the event of
overheating, the overheating protection will be tripped. In that
case the device switches off completely. If so, please contact
the customer service to have the overheating protection
replaced.
Information about the device
Device description
The ceramic heater serves to generate and distribute warm air,
e.g. in interior spaces.
The device generates heat by means of a ceramic heating
element. The air surrounding the ceramic heating element is
heated. The heated air is blown into the room by a fan.
Device depiction
1
3
4
5
6
2
TDS 10 M / TDS 20 M
No. Designation
1 transport handle
2 air outlet
3 switch for heating level1
4 switch for heating level2
5 operating light
6 air inlet

Trotec TDS 10 M Specifications

General

Brand	Trotec
Model	TDS 10 M
Category	Heater
Language	English