To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt 25B-554H711 and is the answer not in the manual?
General| Engine Type | 4-Cycle |
|---|---|
| Engine Power | 140cc |
| Deck Material | Steel |
| Drive Type | Self-Propelled |
| Cutting Height | 1.25 to 3.75 inches |
| Cutting Height Adjustment | Dual-Lever |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge | Yes |
| Cutting Width | 21 inches |
| Cutting Options | 3-in-1 |
Expresses gratitude for purchasing the edger and highlights its engineering.
Instructs users to record model and serial numbers for support.
Provides contact information and resources for customer assistance.
Emphasizes reading the manual, understanding controls, and proper use.
Details pre-operation checks like area inspection and wearing safety gear.
Provides crucial safety instructions for handling gasoline to prevent fire and injury.
Outlines critical safety rules for operating the edger, like blade contact and bystanders.
Warns about the dangers of children around power equipment and how to keep them safe.
Covers safe practices for engine operation, cleaning, and storing the machine.
Explains the importance and requirement of a spark arrestor for certain land types.
Explains various safety symbols found on the product and in the manual.
Lists the items included in the product packaging.
Provides step-by-step instructions for assembling the edger handles.
Details how to connect the control cable to the blade control.
Instructions on how to properly route and secure the control cable.
Guides on how to attach and route the starter rope.
Explains how to adjust the edger blade angle for different cutting positions.
Instructions for filling the engine with gas and oil.
Explains the function of the recoil starter for engine ignition.
Describes the primer's role in fuel delivery for starting the engine.
Details how to adjust the edger for use along curbs.
Explains the safety mechanism for operating the edger blade.
Describes how to adjust the cutting depth of the edger blade.
Explains how to change the blade angle for different cutting styles.
Step-by-step guide on how to start the edger's engine safely.
Simple instruction on how to stop the engine by releasing the blade control.
Provides instructions and safety warnings for performing edging tasks.
Details how to use the curb height adjustment for edging along curbs.
Explains how to set the bevel adjustment lever for bevelled edging.
Instructions for installing and using the optional trenching feature.
General safety warning before maintenance and engine maintenance reference.
Safety warning and procedure for removing and replacing the edger blade.
Details lubrication points for wheels, pivot points, and bearing blocks.
Step-by-step guide for replacing the drive belt on the edger.
Instructions for preparing the edger for long-term storage to prevent damage.
Table listing common engine start, run, and overheat issues and solutions.
Details the limited warranty terms, coverage, and exclusions for the product.
