To Next PageTo Next PageWhy should I avoid leaving non-stabilized gasoline in my Troy-Bilt 34064 for more than 30 days?
To prevent gum and other deposits from forming, which can foul the carburetor and fuel line, avoid leaving non-stabilized gasoline in the fuel tank for longer than 30 days.
General| Deck Material | Steel |
|---|---|
| Weight | 520 lb |
| Drive System | Push |
| Wheel Size | 8 in |
| Starter Type | Recoil |
| Grass Collection | Yes |
Warning regarding engine spark arresters for specific states.
Unit readiness, operator responsibility, training, and operating area safety.
Guidelines on clothing, fatigue, emergencies, and safe operating practices.
Explains the purpose and location of safety decals on the unit.
Safety procedures for performing maintenance and storing the equipment.
Steps for checking the unit upon delivery and removing it from packaging.
List of tools and materials necessary for assembling the unit.
Detailed instructions for attaching the handlebars to the unit.
How to install and adjust control rods for proper operation.
Installing the throttle control lever and securing wiring with cable ties.
Procedure for safely removing the unit from its shipping crate.
Instructions for assembling and installing the cutter bar mechanism.
Attaching the weed diverter to clear debris during operation.
Essential steps for filling engine oil and charging the battery.
Verifying and adjusting tire pressure for safe operation.
Description and function of the throttle and choke control lever.
Explanation of the safety system designed to shut off the engine.
How the wheel drive levers engage, disengage, and control movement.
Location and function of the engine oil dipstick and fill hole.
How the shoes adjust cutter bar height to clear ground debris.
Information about the cutter bar's function and the importance of the guard.
Importance of keeping the fuel tank area clean.
How to use the starter rope to start the engine.
Operation of the keyswitch for starting electric-start models.
How to engage and disengage the cutter bar drive.
The role of the weed diverter in clearing debris.
How to use the primer bulb to prepare the engine for starting.
Essential checks to perform before each use of the unit.
Correct procedures for filling the fuel tank and adjusting the cutter bar shoes.
Step-by-step guide for starting the mower's engine.
Proper throttle use and procedures for stopping the engine.
Testing the safety system to ensure it functions correctly.
How to engage and operate the wheel drive and cutter blade.
Advice on moving, turning, and general use of the mower.
Procedures for resolving issues like the unit getting stuck or the blade clogging.
Guidelines for safely operating the mower on inclined terrain.
How to safely stop the mower in normal or emergency situations.
A schedule outlining routine maintenance tasks and their intervals.
Checking tire pressure and removing grass from wheel axles.
Adjusting control rods and wheel drive belt tension for optimal performance.
Adjusting the guides for the cutter bar drive belt.
Procedures for maintaining the drive chain and cutter bar assembly.
Instructions on how to sharpen or replace cutter bar blades and ledger plates.
Checking and replacing eccentric radial bearings, channels, and shafts.
Tasks like checking oil, adding oil, and changing engine oil.
Maintaining the air cleaner, inspecting the spark plug, and servicing the battery.
Tightening hardware, lubricating parts, and preparing the unit for storage.
Solutions for issues like dull blades, improper adjustments, or uneven terrain.
Addressing problems with the cutter bar not moving or wheels not engaging.
Solutions for the unit pulling, excessive noise, and engine starting/running problems.
Addressing engine not stopping, keyswitch, and battery charging problems.
An overview of parts and their corresponding numbers with diagrams.
A detailed list of parts specific to the cutter bar assembly.
How to register your unit and understand warranty coverage.
Recording unit information and authorized dealer contact details.
Information on obtaining replacement parts and engine repair services.
