To Next PageTo Next PageWhat to do if wheels turn, but tines don’t on Troy-Bilt Bronco?
If the wheels on your Troy-Bilt Tiller turn, but the tines don’t, examine these: * The tine holder mounting hardware may be missing. Replace the hardware. * A bolt may be loose in the transmission pulley. Tighten the bolt. * Internal transmission wear or damage may have occurred. Contact a local dealer or the factory.
What to do if tines turn, but wheels don’t on Troy-Bilt Tiller?
If the tines on your Troy-Bilt Tiller turn, but the wheels don’t, check these: * The wheel drive pins may not be properly inserted. Insert the drive pins properly. * A bolt may be loose in the transmission pulley. Tighten the bolt. * Internal transmission wear or damage may have occurred. Contact a local dealer or the factory.
What to do if wheels/tines will not turn on Troy-Bilt Bronco?
If the wheels or tines on your Troy-Bilt Tiller won't turn, consider the following: * You might be using the controls improperly. Review the Operation section. * The drive belts may be worn, broken, or misadjusted. Replace or adjust the belts. * A bolt may be loose in the transmission pulley. Tighten the bolt. * Internal transmission wear or damage may have occurred. Contact a local dealer or the factory.
Why is my Troy-Bilt Bronco Tiller engine running poorly?
If your Troy-Bilt Tiller engine is running poorly, it could be due to several reasons: * Stale gasoline: Replace it with fresh gasoline. * A defective or incorrectly gapped spark plug. For solutions for this cause, please consult the Engine Manual. * Dirty air filter(s). For solutions for this cause, please consult the Engine Manual. * Engine cooling system clogged. For solutions for this cause, please consult the Engine Manual. For the following causes, please consult an Engine Service Dealer: carburetor out of adjustment, or dirt/water in fuel tank.
What to do if Troy-Bilt Lawn Mower engine idles rough?
If your Troy-Bilt Lawn Mower engine idles roughly, consider the following: * The spark plug might be fouled, faulty, or have a gap that's too wide: Replace the spark plug and set the plug gap. * The air cleaner might be dirty: Replace the air cleaner element and/or clean the pre-cleaner, if your mower is equipped with one.
Instructions for safe operation of the machine and general precautions.
Guidelines and warnings for operating the tractor on slopes.
Procedures for safely starting and stopping the tractor engine.
Instructions for driving the tractor, including safe operation on slopes.
Tips and safety advice for effective and safe mowing operations.
Procedures for changing engine oil, servicing air cleaner, and spark plug.
Procedures for adjusting the tractor, including deck leveling and parking brake.
Procedures for removing the cutting deck and changing its belt.
Outlines the manufacturer's limited warranty terms for the Troy-Bilt product.
General| Engine Brand | Briggs & Stratton |
|---|---|
| Engine Displacement | 208cc |
| Tine Material | Steel |
| Handle | Adjustable |
| Number of Tines | 4 |
| Warranty | 2 years |
| Engine Type | 4-Cycle |
| Wheel Size | 8 inches |
