Troy-Bilt Pony ES User Manual (English)

Questions and Answers:

J
Jenny JordanJul 26, 2025
Why Troy-Bilt Tiller wheels and tines will not turn?
- M
  Michael McclainJul 27, 2025
  If the wheels and tines on your Troy-Bilt Tiller aren't turning, several factors could be at play. It might be due to improper operation of the controls, a misadjusted forward or reverse clutch control cable (in which case you should adjust the cable tension), a worn or broken clutch belt (check belts and replace if needed), a loose bolt and key in the transmission pulley (tighten the bolt and ensure the key is in place), or internal transmission wear or damage.
K
Kimberly WilliamsAug 2, 2025
What to do if Troy-Bilt Tiller tines turn, but wheels don’t?
- P
  Patricia OrtegaAug 3, 2025
  If the tines on your Troy-Bilt Tiller are turning but the wheels aren't, it could be due to several reasons. Check for missing wheel mounting hardware and replace if necessary. Also, examine the transmission pulley for a loose bolt and key; tighten the bolt and ensure the key is in place. Other potential causes include a misadjusted wheel gear cable, a wheel gear lever that is not fully engaged, or internal transmission wear or damage.
J
James JohnsonAug 10, 2025
How to improve poor tilling performance of Troy-Bilt Pony ES?
- K
  Kyle HallAug 11, 2025
  If your Troy-Bilt Tiller isn't tilling as well as it should, several factors could be the reason. Check for worn tines. Ensure that the depth regulator is set correctly. Verify that the throttle setting is correct. Slipping belts may also cause this issue.
R
Richard ColeAug 18, 2025
What to do if Troy-Bilt Pony ES wheels turn, but tines don’t?
- J
  James RobertsAug 18, 2025
  If the wheels on your Troy-Bilt Tiller are turning but the tines aren't, the issue might be missing tine holder mounting hardware, which would need to be replaced. Another potential cause is internal transmission wear or damage.