Troy-Bilt TB25CS - Specifications

20
SPECIFICATIONS
ENGINE*
DRIVE SHAFT & CUTTING ATTACHMENT*
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
Engine Type.......................................................................................................................................... Air-Cooled, 2-Cycle
Stroke.................................................................................................................................................... 1.25 in. (31.75 mm)
Displacement............................................................................................................................................. 1.9 cu in. (31 cc)
Clutch Type ......................................................................................................................................................... Centrifugal
Idle Speed RPM ...................................................................................................................................... 2,800 - 4,000 rpm
Operating RPM.................................................................................................................................................. 7,200+ rpm
Ignition Type.......................................................................................................................................................... Electronic
Ignition Switch .............................................................................................................................................. Rocker Switch
Spark Plug Gap ....................................................................................................................................... 0.020 in. (0.5 mm)
Lubrication................................................................................................................................................... Fuel/Oil Mixture
Fuel/Oil Ratio.................................................................................................................................................................. 40:1
Carburetor....................................................................................................................................... Diaphragm, All-Position
Starter............................................................................................................................................................... Auto Rewind
Muffler ..................................................................................................................................................... Baffled with Guard
Throttle............................................................................................................................................... Manual Spring Return
Fuel Tank Capacity....................................................................................................................................... 13 oz. (384 ml)
Drive Shaft Housing .......................................................................................................................... Steel Tube, EZ-Link™
Throttle Control ........................................................................................................................................ Finger-Tip Trigger
Approximate Unit Weight (No fuel, with cutting attachment, shield and D-handle)....................................... 13 lbs. (6 kg)
Cutting Mechanism.................................................................................................. SpeedSpool Dual String Cutting Head
Line Spool............................................................................................................................................. Bump Line Releaser
Line Spool Diameter .............................................................................................................................. 3 inches (76.2 mm)
Trimming Line Diameter ................................................................................................................. 0.095 inches (2.41 mm)
Cutting Path Diameter ........................................................................................................................ 17 inches (43.18 cm)