EasyManuals Logo

Troy-Bilt TB360 User Manual

Troy-Bilt TB360
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21Section 8 — troubleShooting
Problem Cause Remedy
Uneven cut 1. Wheels not positioned correctly.
2. Dull blade.
1. Place front and rear wheels in same height
position. (Dual Height Adjusters)
2. Sharpen or replace blade.
Mower will not self propel 1. Belt not installed properly.
2. Debris clogging drive operation.
3. Damaged or worn belt.
4. Drive control out of adjustment.
1. Check belt for proper pulley installation and
movement.
2. Stop engine, disconnect spark plug boot,
and clean out debris.
3. Inspect and replace belt.
4. Adjust drive control. (See Maintenance &
Adjustments section).
High pullback effort 1. Pulling mower backwards before
transmission disengages.
1. Allow the unit to roll forward slightly without
the drive lever(s) engaged before pulling
backwards.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Troy-Bilt TB360 and is the answer not in the manual?

Troy-Bilt TB360 Specifications

General IconGeneral
Engine BrandBriggs & Stratton
Engine Displacement163cc
Cutting Width21 inches
Cutting Height Range1.25 to 3.75 inches
Deck MaterialSteel
Mulching CapabilityYes
Rear Bag CapabilityYes
Side DischargeYes
Oil Capacity20 oz
Starting SystemRecoil
Warranty2 years limited

Related product manuals