7
RULES FOR SAFE OPERATION
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning, or
caution. May be used in conjunction
with other symbols or pictographs.
• WARNING - READ OPERATOR'S
MANUAL
Read the Operator’s Manual(s) and
follow all warnings and safety
instructions. Failure to do so can
result in serious injury to the
operator and/or bystanders.
• WEAR EYE, HEARING AND
HARDHAT PROTECTION
WARNING: Thrown
objects and loud noise can cause
severe eye injury and hearing loss.
Wear eye protection meeting ANSI
Z87.1-1989 standards and ear
protection when
operating this unit. Wear a hard hat.
Use a full face shield when needed.
• DO NOT USE IN THE RAIN
WARNING: Avoid
dangerous environments. Never
operate your unit in the rain, or in
damp or wet conditions. Moisture is
a shock hazard.
SYMBOL MEANING
• GUIDE BAR WARNING:
Contact of the guide bar tip with any
object should be avoided. Tip
contact may cause the guide bar to
move suddenly upward and
backward, which may cause serious
injury.
• USE BOTH HANDS
Always use both hands while
operating the chain saw. Never use
only one hand to operate the saw.
Avoid bar nose contact.
• DOUBLE INSULATED
Two systems of insulation are
provided instead of grounding.
There is no grounding provided
and no means of grounding should
be added to this unit.
To Next Page
Loading...
Need help?
General
