1
This setup guide shows how to connect a 5000 weigh scale indicator to an XRS2 Stick Reader and have recorded weights sent
directly to the stick reader.
The steps required to do this are:
1. Pair the stick reader with a 5000 indicator.
2. Set up the indicator to output weights to the stick reader.
3. Set up the stick reader with a new animal data field for the weight information.
4. Set up the stick reader to receive weight information into the new weight field.
Then you will be ready to use the stick reader with your 5000 indicator.
What you need:
• An XRS2 Stick Reader with firmware above V1.4.4.
• A Tru-Test XR5000 or ID5000 weigh scale indicator.
1
Pairing the stick reader with a 5000 indicator
Before you start, turn on the 5000 indicator and check that
Bluetooth
is enabled.
1. Press to switch on the stick reader.
2. Press and select Settings.
Select Bluetooth.
Select Search for Devices:
XRS2
S
TI
CK READER SETUP G
UI
DE
To Next Page
Need help?
General
