Need help?Do you have a question about the TRUArt Pyrography Pen and is the answer not in the manual?
General| Weight | 1.5 pounds |
|---|---|
| Voltage | 110V |
| Power Source | Electric |
| Power Supply | AC |
| Material | Metal and plastic |
| Tip Types | Multiple interchangeable tips |
A simple and quick process of heating metal or glass and allowing it to cool slowly to remove internal stresses and toughen it.
Guidance on fitting TRUArt tips into other brands of wood burning pens and making custom tips.
Troubleshooting steps for inconsistent or slow heating of the pyrography pen tip.
Steps to diagnose and resolve issues when the pyrography pen does not heat up.
Description of files used for cleaning and refurbishing wire tips, removing carbon deposits.
Explanation of pliers use for tightening and loosening pen nuts over collets that hold wire tips.
Information on how sponges are used for dampening and cleaning pyrography tips during use.
Description of tweezers for easily handling and selecting pyrography tips from the container.
Guide on adjusting collets for thicker wire tips, detailing steps for initial adjustment and usage.
Instructions on fitting thinner wire tips, addressing potential looseness and buzzing sounds.
Explains two methods for applying stencils: using carbon transfer tracing paper or photocopying.
Step-by-step guide on applying stencils using carbon transfer paper and a pen.
Method for resizing stencils via photocopying and then applying them using carbon transfer paper.
To Next Page