4
TRUArt Pyrography Pen
Register your purchase at https://truart.co/register to get
access to complimentary tutorials, stencils and updates.
Symbols used in this manual
Operaon Safety for your Pyrography Pen
1. Do not use excessive pressure when wood burning. Learn to adjust the heat seng to
make it work you for instead of stressing the pen and p.
2. Never touch metal objects with a p - this can destroy the unit due to electrical
shortcut.
3. Use care and common sense in how you clean and/or re-sharpen the ps. Use a leather
strop or bugging wheel with ne polishing rouge and learn to work at the lowest
temperature necessary to achieve the result you want.
4. Always keep the unit out of the reach and away from children. Tips are sharp and very
hot and will burn skin and esh easier than wood.
5. Whenever you burn, assume a comfortable and relaxed posion, with respect given to
arm, head, body and leg posion. For example, if you begin to feel stress in the back of
your neck, change the angle you are holding the work, or adjust the height of your seat
to relieve any strain.
6. Always work with sucient quanty and quality of light. Use a shadow light (a strong
light to the le of the work – if you are right handed) that creates a shadow with each
stroke, making it easier to place strokes.
7. Turn the unit OFF whenever you leave it – not only will you avoid a re hazard, but you
will prolong the life of the burning p. Most burning units will heat the p to
To Next Page
Loading...