To Next PageTo Next Page
Need help?Do you have a question about the True TDD-4 and is the answer not in the manual?
General| Brand | True |
|---|---|
| Model | TDD-4 |
| Category | Refrigerator |
| Language | English |
Safety precautions and warnings for units using hydrocarbon refrigerants like R-290.
Essential safety measures to follow when operating electrical appliances.
Instructions for safely disposing of old refrigerators and preventing child entrapment.
Proper procedures for handling and disposing of refrigerants as per regulations.
Strong warnings against the use of extension cords and adapter plugs for safety.
Recommendations for using only manufacturer-approved replacement parts.
Emphasizes proper installation for unit performance and warranty validity.
Detailed step-by-step guide for safely uncrating the refrigeration unit.
Critical instructions for safely connecting the unit to its power supply.
Instructions for proper unit placement, ventilation, and clearance.
Step-by-step process for sealing the cabinet to the floor for stability.
Importance of proper leveling for condensate removal and door function.
Guide to installing standard accessories, including shelves and clips.
Procedures for installing shelves and bin dividers in the unit.
Specific guidance on positioning bin dividers for optimal use.
Key factors regarding CO2 pressure for draft beer systems.
Important safety warnings related to handling pressurized CO2 tanks.
List of necessary tools for installing the CO2 knock-out system.
List of necessary tools for installing the CO2 knock-out system.
Steps for adjusting slide doors on two and three-door units for proper alignment.
Procedure for adjusting slide door rollers to eliminate gaps and ensure proper closure.
Instructions on how to engage and use the slide door's hold-open mechanism.
Initial steps for plugging in and starting the refrigeration unit.
Guidance on locating and adjusting the unit's temperature controls.
Information on where to find the internal light switch.
Explains the difference and application of coil sensing and air sensing controls.
Details the typical cycle of operation for mechanical temperature controls.
Specific procedures for adjusting GE brand mechanical temperature controls.
How to adjust controls for altitude using a provided chart and turning method.
Specific instructions for adjusting Danfoss controls at high altitudes.
Detailed, step-by-step guide for adjusting Danfoss controls at high elevations.
Instructions for adjusting Cutler Hammer temperature controls for altitude compensation.
Sequence of operation for Danfoss electronic controls in refrigerator models.
Sequence of operation for Danfoss electronic controls in freezer/GC models.
Best practices for storing and handling draft beer for optimal quality.
Importance of maintaining correct temperatures for draft beer dispensing.
Factors influencing the required dispensing pressure for draft beer.
Essential steps and tips for properly tapping a beer keg.
Step-by-step instructions for effectively cleaning the unit's condenser coil.
Key warranty details and requirements, including maintenance obligations.
Identifies factors that can damage stainless steel's protective layer.
Lists appropriate cleaning agents for different stainless steel situations.
Eight preventative measures to avoid rust on stainless steel surfaces.
Identifies common draft beer problems and their likely causes for resolution.
Step-by-step instructions for safely replacing a CO2 gas cylinder.
Guides on how to increase and decrease CO2 regulator pressure settings.
Detailed procedure for cleaning beer lines and faucets for hygiene.
Instructions for replacing bulbs in the integrated door lighting system.
Details the warranty coverage for parts and labor over three years.
Explains the extended warranty specifically for the sealed compressor.
Outlines conditions for warranty validity on specific compressor types.
Information on how to properly submit warranty claims with necessary details.
Lists what is not covered by the warranty and its limitations.
