TRUE
trcb – chef base equipment
www.truemfg.com
TEC_RM_006 REV. A
09/21/2018 Page 21 of 27
LAE Control
Manual Activation
Up Button
Info / Set Point
Button
Stand-By
Button
Manual Defrost /
Down Button
CHANGE DISPLAY READOUT FROM FAHRENHEIT TO CELSIUS
WHY: Changing readout display will assist with customer preference/application.
NOTE: Display must be unlocked prior to proceeding.
Cabinet temperature shown on display.
Press and hold until “Mdl” or “SPL” is shown.
Continued next page.
HOLD
HOLD
OR
HOLD
HOLD
VALUE SHOWN BELOW MAY NOT BE YOUR CURRENT SETTING
To Next Page
Loading...
