4
Device installation:
a) Insert the micro SD card into the slot. Always turn off the device whenever inserting or removing the SD card.
b) Install the device on the windshield.
c) Connect the USB port and the cigarette lighter socket with the car charger, then start the engine, the device will
automatically power on and start recording.
Device operation:
a) Automatic video-recording
1. Start the car engine.
2. The device will turn on and start recording automatically.
3. Press le protection button to lock or unlock the recording video le.
4. Press down button to start or stop audio recording.
5. Press Power button to turn off the LCD display.
6. Press OK button to stop or start recording.
7. When you turn the car engine off, the device will save the le and will be automatically powered off.
21. GPS module with speed camera detector
(optional)
22. Speed camera detector voice switch
23. Power connector
24. Adhesive surface
25. Camera holder
21
22
23
24
25
To Next Page
Loading...